Pi-Cubes

Pi-Cubes

0 Share

Pi-Cubes

Pi Cubes is DIY modular system for HVAC Automation. It is  based on the Raspberry Pi B+/A+ as well Raspberry Pi 2. If you want to control your home HVAC system with Raspberry ...

Pi Cubes is DIY modular system for HVAC Automation. It is  based on the Raspberry Pi B+/A+ as well Raspberry Pi 2. If you want to control your home HVAC system with Raspberry Pi there is not complete solution for that. With Pi Cubes you will be able to control your Furnace, Boilers , Heat pump,  etc. There are next modulare Pi Cubes :

  • CC-Pi-Cube-MB (Main Board Pi-Cube Module) – This module contains RPi and has next specifications :
    • 12VDC-15VDC Power Supply Terminal,
    • Real Time Clock,
    • RS485 Communication/Power port for up to four communication thermostats,
    • Port for External Modules, with possibility to connect six additional I/O modules with up to 24 I/Os.
  • CC-Pi-Cube-STAT (Communication Thermostat) – Communication thermostat provides professional looking solution for your room and has next specifications:
    • Power and communication of thermostat through RJ45 Cable.
    • Optional version with humidity sensor.
    • Dial button to operate thermostat.
    • 128×128 TFT colour screen.
  •  CC-Pi-Cube-DO4 (Four Digital Output Module) – External module that provides digital outputs and has next specifications:
    • Four 2A Relay Dry Contacts, Max 24V AC/DC voltage,
    • LED status for each output and module status LED.
  •  CC-Pi-Cube-UI4 (Four Universal Inputs Module) – External modules that provides universal inputs and has next specifications:
    • Four Universal inputs , selectable for 0-10V ,0-20mA and Resistance input.
    • Resistance mode is 0-350K compatible and supports 10K Type2 NTC sensors.
    • Module Status LED.
  •  CC-Pi-Cube-UO4 (Four Universal Outputs Module) – External module that provides universal outputs and has next specifications:
    • Four Universal outputs , selectable for 0-10V analog output or 0V/12VDC digital output with maximum load of 100mA.
    • LED status for each output and module status LED.
  • CC-Pi-Cube-PB (Power Backup Module) – External module provides additional power backup,which provides additional time for RPi to do safely shut down and prevent SD card corruption.

 

IMG_3615

“Raspberry Pi is a trademark of the Raspberry Pi Foundation”

Leave a reply

Your email address will not be published.

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>